Michael Jordan late in the fourth quarter with the ball in his hands, driving hard to the basket.
Harry Houdini hanging upside-down by his ankles, shaking his way out of a straight jacket and a pair of handcuffs.
Roy Underhill, axe hoisted on his shoulder, standing before an audience with a smile on his face and a story to tell.
Eddie Van Halen standing in the spotlight, hair dripping with sweat and he leans into his reverb enhanced "Frankenstrat" and drives into a heart stopping performance of "Eruption."
All examples of masters at the top of their game. They are awesome to witness at action, in their element, and in perfect control. Every endeavor has its innovators and masters and the story is repeated again and again through a multitude of disciplines. They have high levels of skill built on layers of experience and hard work and it is both inspiring and humbling to witness these individuals at practice and play. I recently had a chance to watch a man I consider a master at work in his new home.
Ive written here before of the respect I have for Bad Axe Saws and their maker Mark Harrell. I have two of these saws in my tool chest now and I built it with room for two more. These two saws a couple of the most reliable problem solvers in my arsenal. Ive met with Mark a couple times, we live in the same area, and he is an extremely knowledgeable person with a passion to make the best damn saws possible. He has impressed me from the get go.
The only credible issue there has ever been is his backlog of work. Up until relatively recently Mark worked hard everyday turning out saws from the basement workshop of his home. He worked by himself and turned out great saws, but one man can only accomplish so much in a day. I was encouraged a while ago when he started to hire some staff and build a crew to help him turn out saws at a more timely pace.
Then I heard the best news of all for Bad Axe Saws. Just after this years WIA Midwest conference Mark made like it was groundhog day, He poked his head up above the below ground digs of his "Saw Dungeon" and found the fresh air and daylight to his liking. He found a good shop space with all the accouterments a business needs to grow. The new Bad Axe Emporium is a large, spacious place with lots of light and room. I got an invite to visit the other day, even though they are still settling in, and it is great to see a man and a business Ive supported for a long time do well and come into its own. Its kind of like watching your football team win the Super Bowl.
I have to admit, I was surprised at how much goes into those final adjustments and touches. I have pulled vintage saws apart, cleaned them and sharpened them to good results so I thought I knew a bit about the process. Its kind of like saying a child who can recite the alphabet could replicate Shakespeares sonnets Could they learn to do so? Yes, but not without years of study and work. I thought I knew what went into saw making and maintenance, but after spending just one afternoon watching and talking with Mark, I learned so much more.
After a quick tour around the place and the various stations. Mark and I discussed saw handles and how they fit your hand. Yes, if your paw is bigger or smaller than the average bear you may never know what its like to use a saw that fits your hand and Mark has the answer to that as he can size his handles to the customer. Options are the real beauty behind buying a Bad Axe Saw. From the wood species and size of the handle to the metal used for the back and saw nuts to custom filings. When hes done your saw will look and perform exactly like you want. Not sure what you want? Drop him a line and hell answer all your questions and put you on the right path.
Mark pulled down one of the next saws in his queue to show me the process he goes through to get the assembled saws up to his standards. It starts with joining the teeth of the saw. When I joint teeth I use a jig to keep my file flat, Marks practiced hand was able to just grab a file, make two runs, and move on. I already knew at this point I was watching someone who had mastered his art.
The process continued as I watched him start to file the teeth to shape and sharpness. In my shop I had recently resharpened my crosscut panel saw and there was a distinct difference between my work and Marks educated hands. You could even tell he was using a heavier touch on his first pass, then a lighter touch to his second pass.
I use a couple of shop made guides when I sharpen. They help keep my angles more or less consistent. Marks hands were a machine and his eyes were watching to assure he achieved exactly the right results. The fluidity and economy of movement throughout the whole sharpening process was inspiring. I dont easily throw around terms like "master" or "virtuoso" but it was clear Marks done this a time or two before.
With the file work done he stones each side of the tooth line to remove some of the burr and tease the saw into cutting straight. Quality saws will cut the line for you, all you really have to do is provide the kinetic force to move them and be smart enough not to get in their way by trying to over control them.
Then came a process that surprised me a bit. through the assembly process, and the joining of the saw plate and the back, a saw can pick up some slight warp and twist. Mark removes the handle and uses a couple crescent wrenches and a practiced eye to adjust the plate fair.
Then he replaces the handle and goes about rechecking and readjusting to get the saw blade lined up perfectly with the handle. The forces of the handle and the saw nuts can change a saw and need to be taken into account.
This process took him the longest, maybe ten minutes, and by the end he was adjusting and fine tuning for imperfections that I couldnt even see until he put his finger on them to show me. This dashed any of my foolish notions that more production and personnel would lead to less of a product. I would think it only increases the quality of these saws because it frees up Marks hands and eyes to focus on making the saw as perfectly perfect and humanly possible before it leaves the shop.
I lost track of time while I was watching him but Id estimate the process took him around forty-fives minutes from start to where he was happy enough to let me have a test cut or two.
How are you going to go to the Bad Axe Emporium and not come away without making some saw dust? Come on man, this 10" 15 ppi "Doc Holiday" dovetail saw tore right through 5/4 white oak without even stressing about it. This is something I continue to be amazed at. Its something that in my estimation a high ppi saw shouldnt be able to handle, but Marks saws laugh at the challenge.
Besides demonstrating his mastery over steel and wood Mark also shared some other exciting information with me and I want to spread the word.
The first thing is that he is so happy to be working up above ground level that he is throwing a party. Bad Axe Tool Works will be having a big open house this coming January 12th 2013, from Noon to Four PM. I will be there and so will other woodworkers, woodworking instructors, and tool makers. It is bound to be a good time. If youre interested in coming you should drop Mark a line HERE.
The other exciting news is Mark decided to start teaching classes on his saw filing techniques to the world. With such a great shop and all the space and benches he needs hes thinking of having quarterly classes on the subject. I know Ill be in attendance because there is no one Ive met who has a better understanding of this important tool, and if it makes me a better sharpener and sawyer, then count me in.
To keep up with information about what Mark and Bad Axe Tools is up to you can always visit his website, www.badaxetoolworks.com or keep even more up to date by liking and following Bad Axe on Facebook by going to www.facebook.com/BadAxeToolWorks
Ratione et Passionis
Oldwolf
Harry Houdini hanging upside-down by his ankles, shaking his way out of a straight jacket and a pair of handcuffs.
Roy Underhill, axe hoisted on his shoulder, standing before an audience with a smile on his face and a story to tell.
Eddie Van Halen standing in the spotlight, hair dripping with sweat and he leans into his reverb enhanced "Frankenstrat" and drives into a heart stopping performance of "Eruption."
 |
| Photo borrowed from Wikipedia Commons |
Ive written here before of the respect I have for Bad Axe Saws and their maker Mark Harrell. I have two of these saws in my tool chest now and I built it with room for two more. These two saws a couple of the most reliable problem solvers in my arsenal. Ive met with Mark a couple times, we live in the same area, and he is an extremely knowledgeable person with a passion to make the best damn saws possible. He has impressed me from the get go.
 |
| My twin Bad Axe guns, A hybrid, 12" dovetail / small tenon saw and a 12" carcass saw. |
Then I heard the best news of all for Bad Axe Saws. Just after this years WIA Midwest conference Mark made like it was groundhog day, He poked his head up above the below ground digs of his "Saw Dungeon" and found the fresh air and daylight to his liking. He found a good shop space with all the accouterments a business needs to grow. The new Bad Axe Emporium is a large, spacious place with lots of light and room. I got an invite to visit the other day, even though they are still settling in, and it is great to see a man and a business Ive supported for a long time do well and come into its own. Its kind of like watching your football team win the Super Bowl.
 |
| A look across the Bad Axe Emporium from behind Marks personal bench. In the background you can see Mark and one of his employees working together to fit a back onto a troublesome saw plate. |
 |
| A shot of Marks personal bench space, an awesome slab workbench where every saw gets put through its final paces before it gets to your shop. |
After a quick tour around the place and the various stations. Mark and I discussed saw handles and how they fit your hand. Yes, if your paw is bigger or smaller than the average bear you may never know what its like to use a saw that fits your hand and Mark has the answer to that as he can size his handles to the customer. Options are the real beauty behind buying a Bad Axe Saw. From the wood species and size of the handle to the metal used for the back and saw nuts to custom filings. When hes done your saw will look and perform exactly like you want. Not sure what you want? Drop him a line and hell answer all your questions and put you on the right path.
Mark pulled down one of the next saws in his queue to show me the process he goes through to get the assembled saws up to his standards. It starts with joining the teeth of the saw. When I joint teeth I use a jig to keep my file flat, Marks practiced hand was able to just grab a file, make two runs, and move on. I already knew at this point I was watching someone who had mastered his art.The process continued as I watched him start to file the teeth to shape and sharpness. In my shop I had recently resharpened my crosscut panel saw and there was a distinct difference between my work and Marks educated hands. You could even tell he was using a heavier touch on his first pass, then a lighter touch to his second pass. I use a couple of shop made guides when I sharpen. They help keep my angles more or less consistent. Marks hands were a machine and his eyes were watching to assure he achieved exactly the right results. The fluidity and economy of movement throughout the whole sharpening process was inspiring. I dont easily throw around terms like "master" or "virtuoso" but it was clear Marks done this a time or two before.With the file work done he stones each side of the tooth line to remove some of the burr and tease the saw into cutting straight. Quality saws will cut the line for you, all you really have to do is provide the kinetic force to move them and be smart enough not to get in their way by trying to over control them.Then came a process that surprised me a bit. through the assembly process, and the joining of the saw plate and the back, a saw can pick up some slight warp and twist. Mark removes the handle and uses a couple crescent wrenches and a practiced eye to adjust the plate fair.Then he replaces the handle and goes about rechecking and readjusting to get the saw blade lined up perfectly with the handle. The forces of the handle and the saw nuts can change a saw and need to be taken into account.This process took him the longest, maybe ten minutes, and by the end he was adjusting and fine tuning for imperfections that I couldnt even see until he put his finger on them to show me. This dashed any of my foolish notions that more production and personnel would lead to less of a product. I would think it only increases the quality of these saws because it frees up Marks hands and eyes to focus on making the saw as perfectly perfect and humanly possible before it leaves the shop.I lost track of time while I was watching him but Id estimate the process took him around forty-fives minutes from start to where he was happy enough to let me have a test cut or two.How are you going to go to the Bad Axe Emporium and not come away without making some saw dust? Come on man, this 10" 15 ppi "Doc Holiday" dovetail saw tore right through 5/4 white oak without even stressing about it. This is something I continue to be amazed at. Its something that in my estimation a high ppi saw shouldnt be able to handle, but Marks saws laugh at the challenge.Besides demonstrating his mastery over steel and wood Mark also shared some other exciting information with me and I want to spread the word.
The first thing is that he is so happy to be working up above ground level that he is throwing a party. Bad Axe Tool Works will be having a big open house this coming January 12th 2013, from Noon to Four PM. I will be there and so will other woodworkers, woodworking instructors, and tool makers. It is bound to be a good time. If youre interested in coming you should drop Mark a line HERE.
The other exciting news is Mark decided to start teaching classes on his saw filing techniques to the world. With such a great shop and all the space and benches he needs hes thinking of having quarterly classes on the subject. I know Ill be in attendance because there is no one Ive met who has a better understanding of this important tool, and if it makes me a better sharpener and sawyer, then count me in.
To keep up with information about what Mark and Bad Axe Tools is up to you can always visit his website, www.badaxetoolworks.com or keep even more up to date by liking and following Bad Axe on Facebook by going to www.facebook.com/BadAxeToolWorks
Ratione et Passionis
Oldwolf
Postingan Populer
-
balsa wood projects for free Balsa wood projects for free, this… | chair...
-
Nothin’ fancy formed as a bluegrass band in 1994 to compete in a bluegrass competition. since then...
-
As some of you know, my current shop is set up in a small 5 foot by 9 foot area that shares space with our door to the outside and the stair... -
Earlier this summer I picked up a copy of Peter Follansbees video "17th Century New England Carving" and I started on a bit of a j... -
New years is the traditional chance to be reborn with new convictions that are meant to make you a better, more ideal person. While I like t... -
It wasnt really all that long ago, in historical terms, that average and mostly anonymous craftsman created many pieces of furniture that ar...
-
What a great addition to any shop! you’ll not only know the time, but also the temperature and hum...
-
Community woodworking workshop - learn to make handmade furniture, rustic furniture, and custom re...
-
Pathways to apprenticeship. there are a number of different ways to enter an apprenticeship in ont...
0 komentar:
Posting Komentar