Well, as its a little warmer now than it was this morning I decided to go back down to the shop and finish the veggie and dip bowl.
Lets look at the photos:
Ive been looking at the bowl for several days and I decided it would look better and hold more food if it were hollowed out a little more so thats what I did. I deepened it by 3/4" and I also beveled the rims This photo shows it mounted on the lathe before hollowing:
The next three photos show the bowl after it was hollowed out more and sanded. I sanded to 320 grit and polished it with pine shavings. This photo shows the end grain on the side of the bowl:
This is a photo of it looking down on it:
And this is it from the side:
Here are photos of the bowl with a coat of General Finishes salad bowl varnish:
As its too cold for the varnish to dry today, Ill take it inside and let it dry over night and tomorrow and for the next several days Ill give it a very thin coat of varnish. Afterwards Ill polish it. Look for the final finish photos on Sunday.VW
0 komentar:
Posting Komentar