To continue from yesterday: Ive taken the bowl back down to the wood shop and Ive deepened the two sections of the bowl so it will accommodate both the bowl in the center with veggies all around it.
Here are the photos:
This photo shows a side view of the bowl and if you look carefully you can see a little tear out in the end grain. Im dealing with this by sharpening my roughing gouge and very gently shaving away the surface:
Here is the bowl after a couple of minutes-you can see how this is smoothing down the surface. It sure saves time on sanding!
Hollowing out the bowl was not difficult as its well balanced and the wood is finely grained so it turned smoothly. Ive fit the dip bowl to fit up to its rim. You could use a bowl like this for nuts or other types of treats as well and it can be used with or without the dip bowl:
In this photo Ive done a little preliminary sanding. I really like this bowl:
Its getting really cold outside and my hands are freezing up and I still have one more project to do, Im going to stop and come back tomorrow and finish sanding it.VW
0 komentar:
Posting Komentar