"The antiquarian might argue that his interest in antiques is an appreciation of historic atmosphere, a love of the beauty of pleasing decay. More often, however, his interest in antique arts boils down to a reverence for the individuality of the past, what man once stood for, the way he lived, and the thoughts he thought."-Eric Sloane "A Reverence For Wood."
I had a hand saw I thought I might want to restore. I knew it was pretty beat up and there were other questions I had about the feasibility of the rescue. Lucky for me I had just the resource to go to.
I live a few short minutes from Mark Harrell at Bad Axe Toolworks, I called him up and stopped over with my rusty prize. He calmly and gently eased me down from my over enthusiasm, the saw really is beyond rescue.
While I was hanging out I got the chance to witness Mark practice a lost art. Hammer smithing a vintage saw plate to remove a bow and re-tension the plate. He was showing one of his apprentices / employees how it was done and it was fascinating. Using a vintage hammer and a live anvil he bounced a series of blows down the saw. One light blow for each tooth, placed slightly above the gullets.
"How did you figure out how to do this?"
"I read about it, then I gave it a try and ruined a couple saw plates until I figured it out."
"It doesnt always work," he continued, "its not for the faint of heart. I managed to ruin one of my own vintage saws a short while ago. You have to really have a feel for how much is enough and how much is too much."
An echo of one of my favorite maxims, The enemy of good is better.
What I really appreciate about Mark is his reverence for the past and how thats encapsulated in the saws he produces. Appreciating the past is one thing, but taking lessons from it and turning those lessons relevant for today is something else entirely. Mark has taken the time to invest a lot of understanding into what made saws work well back when a mans livelihood could very well have depended on it. Those details elevate the quality of the saws he puts into peoples hands. Simple details that make big differences.Mark just sent me a link to an article he wrote about fixing the tension on a vintage back saw. to remove warps, waves, and small kinks. Read THE ARTICLE and youll understand what Im getting at. Looking at the trend of things, an online class from Matt Cianci, an upcoming book from Andrew Lund, and I expect to see an onslaught of "build your own backsaw" endeavors in the near future. I applaud anyone who wants to take this on, but you have to know, doing things the right way is rarely easy.
Whether its a friction fit on the back or a hammer set to the teeth, I know Mark is putting in the time and effort to get it right.
Just reading that article justifies to me the decision of buying my saws from Bad Axe. I have three of them in my saw nest now. A 12" dovetail / small tenon saw filed rip, a 12" carcass saw filed crosscut, and my new 16" tenon saw filed hybrid. All of these saws cut perfectly right out of the gate, and the utility and versatility of the 16" tenon saw is making me fall in love all over again.I try to keep my tool selection a little on the spartan side. I could consider those three saws enough, but I would like to have one more finess saw for fine work and thin stock, so in the next year or so Ill be in the market for a small dovetail saw with a high ppi number (ppi = points per inch). Chances have it Ill be going back to Bad Axe for that saw too.
And then Ill be set on saws. . . until Mark decides to start making hand saws or panel saws.
Ratione et Passionis
Oldwolf
0 komentar:
Posting Komentar