So I cast around for a few days for an idea or two and eventually fixed on the right thing. She does a lot of sewing, making stuffed monsters and puppets of all kinds and she brought some of her sewing stuff with to our temporary living arrangements. I spied her sewing stash the other day, sitting in a neat pile by the dinning room table, and I realized I could build her something that would both help her store her kit and be something flexible that could last her whole life.
I thought of the school box from the book "The Joiner and Cabinet Maker" from Chris Schwarz at Lost Art Press. A few seconds later I thought of the stash of curly red oak I picked up a short while ago. I wanted to use that special stuff for projects for my wife and girls anyway and there isnt enough for four big projects. Four smaller projects will be good As long as I can get things done right and not screw them up completely. Starting with this one.
The boards are pretty rough and took a bit of clean up. I sorted through the stock to find one that was just wide enough for the sides of the box.
Then I set about marking and breaking down the sides.
I planed the boards flat and sized them identical. As I made the final wispy sweep of the smoothing plane I marveled at the figure I had exposed. I have never worked with stock like this before. I have always gone for straight grained, workman like stock. This curly red oak is a bit of a diva to work with. Demanding, exacting, and a little unforgiving, but sharp steel conquers all.
Once planed down smooth the stock was thicker than I would have picked. It weighs in at just under an inch thick. I dont have the means to resaw a board wider than six inches, and I didnt like the idea of ripping the boards, just to resaw them and reglue them or plane them down to a thinner nutrisystem version and leave a ton of that highly figured and beautiful wood on the shop floor.There was no real debate over the decision. The box is built from thick and sturdy stock that will ensure it holds up to years of use and abuse.
Dovetailing the box is another assurance of its longevity. Bombproof construction for a lifetime and then some.
I took the chance to put my new Knew Concepts fretsaw to work. Theres not a much better test than inch thick red oak. The saw worked well, Im going to try a couple other different blades and uses before I pass judgment on whether I prefer it over my old coping saw.
I like to change up the sizes of my dovetails in a project like this. Aesthetically I like a little chunkier dovetail and if you space those out evenly they can easily be mistaken for the template and router cut variety. I space them out both to make it visually interesting and to set my joinery apart. The other day someone asked me why I bother to cut them by hand. My answer was simple, because I like to and because I can. What other reason do you need.
As the box started to come together I got the pleasure of watching the joinery come out tight and the grain and figure of the wood wrap itself around the box. I couldnt help but smile.
In "The Joiner and Cabinet Maker" there are two characters. There is Thomas, the good apprentice who works hard and is able to turn out good work, and then theres Sam. Hes the "bad" apprentice who leaves his tools dull and scattered about and turns in shotty work. I can relate to both of these guys on any given day, though I try very hard to be more Thomas than Sam.So far on this box my inner Thomas seems to be winning out, and that feels good, but I have to keep vigilant, a few minutes of the careless Sam can ruin a project.
Just say no to Sam.
Ratione et Passionis
Oldwolf
Postingan Populer
-
balsa wood projects for free Balsa wood projects for free, this… | chair...
-
As some of you know, my current shop is set up in a small 5 foot by 9 foot area that shares space with our door to the outside and the stair... -
Nothin’ fancy formed as a bluegrass band in 1994 to compete in a bluegrass competition. since then...
-
Earlier this summer I picked up a copy of Peter Follansbees video "17th Century New England Carving" and I started on a bit of a j... -
New years is the traditional chance to be reborn with new convictions that are meant to make you a better, more ideal person. While I like t... -
It wasnt really all that long ago, in historical terms, that average and mostly anonymous craftsman created many pieces of furniture that ar...
-
What a great addition to any shop! you’ll not only know the time, but also the temperature and hum...
-
Community woodworking workshop - learn to make handmade furniture, rustic furniture, and custom re...
-
Woodworking plans at knotty plans. a selection of woodworking plans and project on the internet. u...
0 komentar:
Posting Komentar